Microplastics Analyzer Customer Case Study: How the AML518 Automatic Water Microplastics Analyzer Improves Testing Efficiency by 20 Times

An Industry Conference Introduced Me to a Customer Facing a Microplastics Testing Challenge

I first met Mr. Wang at an industry conference. At the time, AIMOLI had been invited to participate in the exhibition, where we showcased our independently developed AML518 Automatic Water Microplastics Analyzer.

When Mr. Wang visited our booth, he showed great interest in this microplastics analyzer. During our conversation, he discovered an important difference: microplastics analysis around the world still relies primarily on manual operations, while AIMOLI has successfully developed an automatic microplastics analyzer capable of performing the entire testing process automatically.

This came as a pleasant surprise to Mr. Wang.

At that time, Mr. Wang was responsible for a water microplastics testing project. One site alone involved more than 100 water samples that needed to be analyzed. With traditional manual testing methods, each sample required approximately 3–4 hours, and one laboratory technician could process no more than 2–3 samples per day.

More than 100 samples meant a very long testing period. Even without considering labor costs, the time investment alone placed enormous pressure on the entire project.

How could he significantly improve microplastics testing efficiency while maintaining testing quality? This was the most urgent problem Mr. Wang needed to solve.

AML518 Microplastics Analyzer: Five-Step Pretreatment, One Hour to Complete Sample Preparation

After understanding Mr. Wang’s actual requirements, I introduced him to the AML518 Automatic Water Microplastics Analyzer, independently developed by AIMOLI.

The biggest advantage of the AML518 is that it integrates numerous traditionally manual operations into an automated system, achieving coordinated automation from sample pretreatment to testing and analysis.

During sample pretreatment, the AML518 completes water sample processing through five steps:

  1. Filtration: Separates and concentrates microplastic particles from water samples.
  2. Oxidation and Digestion: Removes organic matter from water samples to reduce interference during testing.
  3. Sedimentation: Further separates the target particles.
  4. Vacuum Filtration: Collects and concentrates microplastic particles.
  5. Transfer: Prepares the processed sample into a droplet-shaped sample and transfers it onto a glass slide.

The entire five-step sample pretreatment process takes only approximately one hour.

After pretreatment, the glass slides are neatly placed on a dedicated sample rack. Once the analyzer starts, its robotic arm follows a preset program and automatically picks up samples one by one, from top to bottom, for subsequent analysis.

After analyzing each sample, the robotic arm automatically returns it to its original position before moving on to the next sample.

The entire process eliminates the need for laboratory technicians to repeatedly replace samples manually. From sample processing and automatic sample loading to microscopic imaging, Raman spectroscopy detection, and data analysis, every stage operates through an integrated system combining automation, intelligence, and digital technology.

After listening to my introduction and understanding the complete operating process, Mr. Wang was extremely pleased. He immediately commented that the AML518 could improve testing efficiency by 20 times. This was exactly the solution he had been looking for.

20 Times Higher Testing Efficiency: Mr. Wang Decides to Purchase the AML518 Next Time

What does testing efficiency mean for a project involving hundreds of water samples?

Traditional manual testing not only requires a significant amount of time but also requires technicians to repeatedly perform sample preparation, particle observation, identification, and spectral analysis. As the number of samples increases, the manual workload grows rapidly.

The AML518 Automatic Water Microplastics Analyzer completely changes this working process.

Through automated sample preparation, robotic sample loading, and microscopic Raman spectroscopy analysis, repetitive tasks that previously required extensive manual involvement can now be completed automatically by the instrument.

This not only significantly shortens testing time but also reduces repetitive work for laboratory personnel, allowing laboratories to process large batches of samples more efficiently.

Mr. Wang was very impressed with the AML518’s performance. However, he also honestly told me that because the equipment purchase cost had not been included in the project’s initial budget, he could not purchase the analyzer directly this time.

After our discussion, Mr. Wang ultimately chose the microplastics testing service provided by AIMOLI.

However, he clearly told me that when undertaking similar projects next time, he would make sure to include the equipment purchase budget in advance and planned to purchase an AML518 Automatic Water Microplastics Analyzer.

This customer experience further strengthened my belief that automatic microplastics analyzers have become an important direction for solving testing efficiency challenges in large-scale water sample analysis.

For laboratories with heavy testing workloads, rather than continuously relying on large amounts of manual labor, investing in automated equipment is a better way to establish more efficient testing capabilities.

Why Does the AML518 Microplastics Analyzer Use Raman Spectroscopy?

In addition to automation, analytical technology is another essential factor customers must consider when choosing a microplastics analyzer.

Currently, water microplastics analysis mainly involves infrared spectroscopy, Raman spectroscopy, and mass spectrometry. These technologies differ significantly in particle size detection, sample preparation, analytical capabilities, and equipment costs.

When developing the AML518, we at AIMOLI chose a technical approach that combines microscopy with Raman spectroscopy.

Why did we choose Raman spectroscopy?

1. Infrared Spectroscopy: Difficulties in Meeting the Requirements for Detecting Smaller Microplastics

Although infrared spectroscopy has already been used in microplastics testing, traditional infrared spectroscopy instruments have difficulty identifying microplastic particles smaller than 10 μm.

At the same time, infrared testing requires samples to be prepared as dry films, making wet sample analysis impossible. The sample preparation process is complicated, and equipment costs are also relatively high.

2. Mass Spectrometry: Capable of Detecting Nanoplastics but Requires Expensive Equipment Investment

Mass spectrometry is an important technological approach in microplastics and nanoplastics analysis and can be used for nanoscale plastic analysis.

However, the equipment is expensive, and operating and maintenance costs are high. This makes it unsuitable for widespread adoption by all routine testing laboratories.

3. Raman Spectroscopy: Accurate Microplastics Identification, Wet Sample Analysis, and More Affordable Testing Costs

Raman spectroscopy can accurately identify different types of microplastics through their unique spectral fingerprints, including common plastics such as polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC).

Compared with traditional infrared spectroscopy, Raman spectroscopy does not require samples to be prepared as dry films. It supports direct wet sample analysis without complicated sample drying procedures.

Furthermore, Raman spectroscopy can be combined with microscopic imaging technology to locate, image, and identify tiny plastic particles.

More importantly, Raman spectroscopy offers greater testing flexibility, effectively reducing sample preparation complexity and overall testing costs.

This is the core reason why we at AIMOLI selected Raman spectroscopy and incorporated it into the AML518 Automatic Water Microplastics Analyzer.

How Does the AML518 Automatic Water Microplastics Analyzer Work?

The AML518 is a high-precision microplastics analyzer integrating microscopic imaging technology and Raman spectroscopy. It is specifically designed to identify, analyze, and characterize tiny plastic particles in water, covering particle sizes from the micrometer to millimeter scale.

Its core principle is based on the Raman scattering effect, which obtains the characteristic spectra of different plastic materials. Combined with the spatial resolution capabilities of a microscope, the system can locate, image, and identify microplastic particles.

The complete testing process mainly consists of the following stages:

Step 1: Water Sample Pretreatment

Collected water samples undergo filtration, oxidation and digestion, sedimentation, and vacuum filtration to remove organic matter and other interfering substances while concentrating the microplastic particles in the samples.

Step 2: Sample Preparation

The concentrated microplastic particles are transferred onto suitable substrates, such as glass slides, for microscopic observation and subsequent analysis.

Step 3: Microscopic Imaging

Microscopic imaging technology is used to locate and identify microplastic particles in the samples, obtaining information about their morphology, particle size, and spatial positions.

Step 4: Raman Spectroscopy Detection

Raman spectroscopy collects the characteristic spectra of different particles. Based on their unique spectral fingerprints, the system identifies the corresponding plastic materials.

Step 5: Data Analysis

Microscopic images and Raman spectral data are integrated to complete microplastic particle identification, analysis, and characterization, providing reliable testing data for researchers and testing organizations.

By combining these testing procedures, the AML518 integrates microscopic observation, particle identification, and Raman spectroscopy analysis into one automated system, significantly reducing manual operations and making microplastics testing more efficient and intelligent.

AIMOLI AML518: Making Large-Scale Microplastics Testing Less Dependent on Labor-Intensive Manual Operations

Through Mr. Wang’s customer case, I want to emphasize one important point: the microplastics testing industry needs more than just an instrument capable of identifying plastic particles. What it really needs is an automated solution that can solve practical testing challenges.

When a laboratory needs to process dozens or even hundreds of water samples every day, traditional manual testing methods struggle to balance testing efficiency, personnel requirements, and project schedules.

This is exactly why we at AIMOLI continue to develop and improve the AML518 Automatic Water Microplastics Analyzer.

By combining automated sample pretreatment, robotic sample loading, microscopic imaging, and Raman spectroscopy analysis, we aim to help research institutions, universities, laboratory facilities, environmental testing organizations, and third-party testing laboratories solve the challenges associated with large-scale microplastics testing.

If you are looking for a high-efficiency microplastics analyzer, or if your laboratory is facing challenges such as large sample volumes, lengthy manual testing procedures, and heavy testing workloads, I welcome you to learn more about the AIMOLI AML518 Automatic Water Microplastics Analyzer.

AIMOLI provides not only microplastics analyzer equipment but also professional microplastics testing services.

Let automation technology replace repetitive manual operations, allowing laboratories to devote more time and energy to valuable scientific research and testing work. This is the original intention behind my development and promotion of the AML518 Automatic Water Microplastics Analyzer.

AIMOLI