Function：Measuring well depth, water level, drop-down of the groundwater. Advantage：1 probe, 1 operation, Replace 3 instruments, and inexpensive.
Introduction
Traditional on-site sampling requires carrying a water level meter, well depth gauge, and drawdown meter separately, each needing to be lowered into the well individually. By integrating these into one device, the number of instruments to carry is reduced, allowing for the completion of three water level measurements in a single operation, significantly improving work efficiency, saving time and effort, and enhancing practicality.
Technical Features
One probe, one descent.
While others need 3 instruments to measure parameters, Amery only needs one.
Lightweight, portable, integrated design, and more affordable.
Integrating the water level meter, well depth gauge, and drawdown meter into a single unit, overcoming multiple technical barriers. Currently, there is no other company domestically or internationally that can achieve this.
The software on the three-water-level instrument is mature, having been used on other environmental instruments for nearly 10 years without any problems, ensuring stability.
Unless intentionally damaged (e.g., by hammering or dropping from a five-story building), malfunctions are unlikely under normal use, guaranteeing reliability.
Main Specifications
Product
AML913
AML913 PLUS
Water Level Function
Yes
Yes
Well Depth Function
Yes
Yes
Drawdown Function
Yes
Yes
Drawdown Interlock Function
Yes (Switch Quantity)
Yes (Digital Quantity)
Water Temperature
No
Yes
Probe
Is it necessary toReplace Probe
One probe, no replacement needed
Material
316L stainless steel, fluororubber, nylon, ABS, and Teflon
Grade
IP68
Reel
Measurement Scale
100m
100m
200m
200m
300m
300m
Measuring Scale
Sheath Material
Polyethylene
Polyethylene
Resolution
1mm
1mm
Control Panel
Operating Mode
Water level/Well depth/Drawdown/Automatic drawdown interlock control
